1947 farmall h that im plowing with it ... Found dead in a ...
got running ...it had no carb when i got it and mud and junk in the tank generator pulley and shaft was snapped off .. found after i plowed.. new ...
START VIDEO: CLICK on 'ARROW' IN MIDDLE OF SCREEN
NEAR ROCK CREEK: 15550 Anton is a Pottery Barn inspired home in a classic four bedroom two bath craftsman, ready for immediate move in. This home ...
Buck Rakes and Blowers
Did he say buck naked and blowing? No, it was one way to harvest the hay and store it in the barn for the cattle during the winter. Bringing in the hay was nothing but sweat equity. A large number of the farms around our place were beginning to purchase balers and elevators to put the hay into the barn, Dad used the old ‘buck rake’ and blower method. For those who are unfamiliar with a buck rake, I’ll try to describe one here.
Although most buck rakes were hand-made on the farm, some could be purchased as well. Dad made his out of an old car or truck chassis and basically it consisted of the wheels, frame, motor, dashboard, seat and steering wheel. On the back he built a pickup cage, something like a fork lift, only with 8 or 10 forks made out of 4″ X 4″ X 12′ long pieces of wood, shaved to a point on the front end. The forks were attached to a metal cross-piece and that in turn was attached to the car chassis with 2 large hinges, so it could be lifted off the ground after it was filled with hay. There was a back stop to contain the hay, and a couple of side rails as well. There was a power winch to pull the rake up off the ground. The winch was hand-made, by my Dad, out of another old rear end from another vehicle. It had a drum mounted on one axle to wind up the cable, and a brake on the other axle. When the brake was applied to one axle, the other drum would turn and pull up the cable, which in turn through a pulley system, pulled the hay-fork off the ground for the ride up to the barn. I’m getting a little ahead of myself, as the hay had to be cut a few days before to allow it to dry in the sun.  Most places had a hay mower powered by the power take off on the tractor, so only 1 person was needed to cut the hay. We used an old pull mower that was powered by the wheels on it, so we needed 2 people to cut hay, one on the tractor and one on the mower. As I said before, the hay had to dry out before you put it into the barn, or if it were damp, it could burst into flame in the barn with disastrous results.
...24v dc relay starter Directory
This original wood barn pulley has a stunning wood patina and is in relatively great ... Pulley has a beautiful and simple silhouette with a heavy iron pulley ...
This is an antique Farm Barn or Nautical Ship Pulley with a wood frame and 2 iron wheels for a rope up to 7/8" in diameter. ...
A smoothly operating pulley system with a contrepoid lets you raise and lower this pendant to adjust lighting for dining and entertaining. ...
Barn Pulley ... · Everyone's Uploads Groups Flickr Members For a Location Applications Andrew Kufahl's Photostream. Barn Pulley. To take full advantage of Flickr, ...
Well first of all how are you guys doing ? Happy B... I bought this what looks like to me a pulley(maybe a barn pulley) .50 or so.Definitely late 1800's The pics. ...
